Skip to main content

TP-link router setting for DSL modem


We will recommend you to follow some simple steps to connect to the internet through differenteasyguidelines in the form of six phases.
Hardware Settings
1.       Shut down all your devices when you want to linklike computer, modem, and router.
2.       Connect the modem to the TP-Link router’s WAN port through Ethernet cable. So, connect your PC to the LAN port of the TP-Link router with the help of the Ethernet cable presented.
3.       Start all devices in a serialmethod, modem firstly need to follow by the router and then PC.
Phase 1                                           
As the hardware setting is finished, you have to access to the management web page for router via the link given.
tp link wifi setup http //tplinklogin.net/

Phase 2

How to configure the WAN link:


When you turn on the tplinklogin.net192.168.0.1 login, you will go through a network option given the left side of the page, go to that. Next go to WAN and adapt the WAN Connection enter to PPPoE.
Phase 3
Next you have to include the PPPoE username as well as the password provided by your Internet service provider.
Phase 4
You can also save your settings, by choosing the save option given in the menu. This will link you to the web right away.
Phase 5
Later few minutes, just find the WAN port on the position web page. So, any IP address shown on it specifies that the connection between your modem and router that has been built.
Phase 6
If you don’t identify any WAN IP address or no internet connectivity, then better to go through the steps given below.
1.       Turn off your DSL modem, followed by the router and computer in a serialmethod. Then need to wait for a few minutes and then turnon the modem.
2.       Then you need to provide modem few moments to get configured and as the modem is set, turn on the router and your PC. This will start the connection between your devices and link you to the internet.

Conclusion
Linking a router to your devices is not a tiresomeprocedure. You have to be careful with the connections and follow the guidelinesgiven in the physical or online guidebook.
Labels:

Comments

  1. Alen SmithApril 29, 2020 at 5:36 AM

    Thanks for give us valuable information If you are Looking for TP-link Support call on 1800987893 , visit on: TP-link Support

    ReplyDelete

Post a Comment

Popular posts from this blog

Tplinkwifi net login for smb //tplinkwifi.net

The TP-LINK router is used to install in Small Office and for Home Office and users demanding higher networking output. The great antennas make sure nonstop Wi-Fi signal to all your devices while increase widespread coverage all through your house, and the built in Ethernet ports supply high speed link to your wired strategy. For this you need to do tplinkwifi net login . Below are steps to set up the Tplinkwifi net Position Your Router • The product should not be located in a place where it will be exposed to moisture or excessive heat. • Put the router in a place where it can be linked to numerous devices as well as to a power source. • Make certain the cables and power cord is securely placed out of the way so they do not make a tripping hazard.  Read Here: tplink parental controls using mobile application Connect Your Router Follow the steps below to connect your router .    If your internet connection is through an Ethernet cable from the wall instead o
1 comment
Read more

Connect USB device to the D-Link DIR‑505

The router device like D-link DIR 505 are basically a kind of portable plug-in type router which support All-in-one mobile companion and allows the user to share his files and data along with internet up to 150 Mbps data rate with all the compact devices like USB device which you can easily carry along with you or keep in your pocket.  As it’s a user-friendly product so you can easily connect D-link DIR-505 with a USB device, you can check more details about this on websites like d-linkaplocal.com or in dlinkap local wizard for that first of all   we have to make sure that we have made the shared port as a trusted program in our anti-virus software or in our firewall or disable the settings of anti-virus software. After that, we have to open the share port utility then select the 1st device in the list appeared on the screen and then we have to right-click on properties button which is just above the refresh button in the tab.  Now a new tab opens on your
Post a Comment
Read more

how to change dlink wifi password

If you are business owner and wants to connect you’re all the computers to internet without any problem then D-Link wireless router is the best one of the best router. With the help of this you can share files internally between machines and can allows you to connect multiple connections on a single network. If any time you want to change the settings of your router then you need to enter the administrative password if you have created. To reset the password in case you have forgot password then you have to reset the router to its factory default state. How to Reset Admin Password 1.        Press the reset button with the help of a pin on the side or back of the router. 2.        Keep holding the button for 10 sec without touching the power button. Wait till the WLAN light stop blinking. 3.        Open the web browser on your computer and type 192.168.0.1 in the address bar and press ENTER key. 4.        Type "admin" in the username field and leave password fie
Post a Comment
Read more