Skip to main content

TP-Link Archer C20 AC750 Wireless Dual Band Router Introduction


The C20 AC750 wireless router comes with 2 external antennas, dual band Wi-Fi with various nice features. I used this device for many days at my home as well as in my office and after using I want to tell you all that this router comes with a nice design with awesome look and comes with two antennas, USB port, LAN ports, power button and USB port.

tolinkwifi.net TP-Link router login


If we talk about tp link Wi-Fi router configuration then you can do it very easily by using your mobile, laptop or computer. You just need to open the settings site to configure your router. It supports 802.11ac standard and is also backward compatibility with 802.11n. It is a dual-band router and offers 2 dedicated networks simultaneously for amazing wireless performance. You will get up to 433 Mbps speed on 5GHz and 300Mbps on 2.4GHz.

It has two antennas for wider and seamless coverage and you will never see any network distraction. If you have big house or office then this is the best router for you. You will get a parental control feature in this router as well to restrict access to certain websites. It is good for home and office where you will never like your children or employees to waste time on useless stuff. As it supports IPv6, so this device is ready for the next generation of the internet.

This router is very easy to setup and configures as you just need to connect your PC with the router over LAN and then open 192.168.0.1 IP address in the browser to tplink Wi-Fi router configuration by providing your username and password. The default username is admin and the default password is admin but if you have changed the username and password then you should use them to configure or change the settings of your router.


Labels:

Comments

  1. Alen SmithApril 29, 2020 at 5:39 AM

    Thanks for give us valuable information If you are Looking for TP-link Support call on 1800987893 , visit on: TP-Link Contact Number

    ReplyDelete

Post a Comment

Popular posts from this blog

how to change dlink wifi password

If you are business owner and wants to connect you’re all the computers to internet without any problem then D-Link wireless router is the best one of the best router. With the help of this you can share files internally between machines and can allows you to connect multiple connections on a single network. If any time you want to change the settings of your router then you need to enter the administrative password if you have created. To reset the password in case you have forgot password then you have to reset the router to its factory default state. How to Reset Admin Password 1.        Press the reset button with the help of a pin on the side or back of the router. 2.        Keep holding the button for 10 sec without touching the power button. Wait till the WLAN light stop blinking. 3.        Open the web browser on your computer and type 192.168.0.1 in the address bar and press E...
Post a Comment
Read more

Tplinkwifi net login for smb //tplinkwifi.net

The TP-LINK router is used to install in Small Office and for Home Office and users demanding higher networking output. The great antennas make sure nonstop Wi-Fi signal to all your devices while increase widespread coverage all through your house, and the built in Ethernet ports supply high speed link to your wired strategy. For this you need to do tplinkwifi net login . Below are steps to set up the Tplinkwifi net Position Your Router • The product should not be located in a place where it will be exposed to moisture or excessive heat. • Put the router in a place where it can be linked to numerous devices as well as to a power source. • Make certain the cables and power cord is securely placed out of the way so they do not make a tripping hazard.  Read Here: tplink parental controls using mobile application Connect Your Router Follow the steps below to connect your router .    If your internet connection is through an Ethernet cable from the ...
1 comment
Read more

TP-link router setting for DSL modem

We will recommend you to follow some simple steps to connect to the internet through differenteasyguidelines in the form of six phases. Hardware Settings 1.        Shut down all your devices when you want to linklike computer, modem, and router. 2.        Connect the modem to the TP-Link router’s WAN port through Ethernet cable. So, connect your PC to the LAN port of the TP-Link router with the help of the Ethernet cable presented. 3.        Start all devices in a serialmethod, modem firstly need to follow by the router and then PC. Phase 1                                             As the hardware setting is finished, you have to access to the management web page for r...
1 comment
Read more